New Hoodie for Gaby's Boyfriend

I am being a "good girl" this year and continuing with my Make Nine pledge through the second month of the year! 

My newest make is a hoodie for Gaby’s boyfriend (Fabrics #2 and #3). The pattern is the tried-and-true Brad hoodie by Vikisews. I’ve already made this for him twice—once in green and once in blue sweatshirt knit.

I made a few modifications to the pattern; some are my usual tweaks, while others are new. We’ll see how they influence the final fit when Vali tries it on. As for the usual mods, I added a total of 4 cm to the width of the body. Although Vali is quite athletic and slim, he prefers his hoodies on the looser end of the spectrum. I also swapped in a different hood pattern from Burda, as the original Vikisews hood is a bit too large.

Pattern:  Hoodie Brad by Vikisews

Size: 178-184 cm; 40; modified

Fabric: sweatshirt knit, rib knit, cotton jersey

Time to make: five days

The Brad hoodie comes without a pocket, so I added a kangaroo pocket that I designed specifically for this pattern the first time I made it for Vali about three years ago.

I also adjusted the length again. The first version was a bit too short, and the second was a bit too long; I’m hoping this "middle ground" is the charm!

To finish the inside, I covered the neckline seam with twill tape to give the garment a sleeker, more professional look.

Winter was back in town this weekend. The weather was miserable, so we decided to skip our weekly hike. However, the temperatures for the coming week look promising — I’m hoping for a warm, sunny weekend and a satisfying hike soon!

Bonus Blue Hoodie for Gaby

Inspired by the hoodie I made from plush and polar fleece remnants, I dove into my bag of heavyweight brushed fleece scraps. I selected several large pieces that complemented each other and seemed sufficient for a woman's hoodie. The light blue is from Vali's hoodie that I made last year and the navy blue is leftovers from my husband's hoodie and an earlier project for Gaby.

This patchwork involved again a lot of planning, drafting and rearranging of pattern pieces, until I finally managed to fit everything onto the scraps.

Unlike my previous "Page" hoodies, this one is slightly longer, featuring rib-knit cuffs and a hem. I even added a kangaroo pocket. While most of the pieces follow the original Burda pattern, the pocket and hood incorporate elements from a Grasser pattern and another Burda design. It goes to show that the more you sew and the more patterns you collect, the more the process evolves from simple construction into co-designing.

Because fabric for the hood was scarce, I decided to make it from three pieces. This is a fantastic fabric-saving hack, and three-part hoods often offer a better fit. For the lining, I used the blue polyester hood lining I had originally cut for the previous project but ultimately rejected.

Pattern: Burda #103 01/2017

Size: 36, modified

Fabric: sweatshirt fleece

Time to make: 4 days

The finished hood is warm and deep enough without overwhelming the head or pulling backward - an issue I've had with other sweaters.

The side panels are made out of a single piece, eliminating the side seam.

I am thrilled with how this "bonus" hoodie turned out. I had not listed these fabrics in my Make Nine pledge, but this project is a classic stash-buster. No new materials were purchased; every single notion, even the hood string, was something I already had, left over, or salvaged. The end result is an absolute win!

Plush Loungewear Set

I made myself a new set of loungewear and I am quite happy about it. It is another part of my 2026 Make Nine pledge, featuring Fabric 11 (asphalt-colored plush) and the remnants of Fabric 12 (brick-colored fleece). I sewed the heck out of these fabrics: two zippered jackets, one pair of joggers, and one hoodie, all from just 3.5m of fabric!

The pants use the same pattern - Burda #135 (11/2012) - that I made earlier this year for Gaby, but I opted for a larger size 36. I made some major modifications: I elongated the crotch by 3 cm from the top (including seam allowance) and the legs by 11 cm from the bottom. I also straightened the leg below the knee to get a nice straight-leg fit .I am thrilled with the result; the fit is much, much better than Burda #117 from 06/2021, which I’ve sewn a few times before. This is now my go-to pattern for straight joggers!

Pattern: # 135 Burda 11 / 2012

Size: 36, elongated

Fabric: plush fleece

Time to make: 4 days

My only regret with this set is making the jogger pockets entirely out of the main fabric. I had planned everything carefully, intending to cut one pocket piece from plush and the other from a thin black cotton knit. However, it was late in the evening after work when I started sewing, and I accidentally attached the plush piece to the front instead of the lining.

I only noticed the mistake after the pocket was fully assembled. I made a calculated choice: instead of undoing the seams—a nightmare since this plush frays like crazy and hates being unstitched—I decided to just cut two more fleece pieces. It’s not a dealbreaker, but the pockets are a bit thicker than I’d like. Next time, I’ll remember: the best combination for fleece or plush is one piece of main fabric and one piece of thin lining. Trust me, I know from experience!

After the joggers and jackets, I still had some large remnants left, so I decided to make a matching hoodie. This little project took so much effort - measuring, browsing patterns, and Googling colorblock inspiration. I’d wake up with one image in my head only to scrap it and replace it with another!  In the end the choice fell on Burda #103 (01/2017), which I've already made once for myself, out of sweatshirt fleece remnants.

Pattern: Burda #103 01/2017

Size: 36, modified

Fabric: plush fleece, polar fleece

Time to make: actual sewing - two days

I chose the pattern, as raglan sweaters suit color blocking exceptionally well. Besides I know the pattern and my "Page" hoodie, with its relaxed fit, is still one of my most favourite winter wears. 

The hoodie is hemmed with a mirror piece of fabric on the inside; the polar fleece front is hemmed with polar, and the plush back with plush. Yes, I am that pedantic!

For the hood lining, I originally cut a blue polyester piece left over from my zippered jacket. However, I realized I preferred the feel of the brick-colored fleece against my skin. I gathered all my scraps and played a little "fabric Tetris" - one side of the hood lining is made of two pieces, and the other of three! The seams are hidden inside, the look is consistent, and I am so proud of myself for pulling it off. (And don't worry, the blue lining was used in my next project, so nothing went to waste!)

My overall impression - I am so glad I made this hoodie happen, never underestimate the potential of fabric scraps - you just might find an entire hoodie in there:)

Warm Navy Zip-up Hoodie

My fourth Make Nine project for this year - a zip-up hoodie for husband. 

The fabric is warm sweater knit in dark navy and the pattern is Apollo hoodie by Sinclair Patterns - a pattern that had been in my Make Nine list for a couple of years and which i finally decided to try.

Like my own Lotte by Sinclair Patters, which  I made previously this year, I changed so much the visuals of the pattern, that I wouldn't be surprised, if the designers couldn't recognize it themselves :)

The major mods I introduced are the solid color of the front and the sleeves and the zipper at the front. I also added outer pockets, which are copied from a Burda men's hoodie I made last year and I also tweaked a bit the size of the hood, as husband dislikes big and heavy hoods.

 

Pattern:  Apollo Hoodie by Sinclair patterns

Size: Regular 173-180 cm; 50; modified

Fabric: sweatshirt knit fabric, rib knit, cotton knit

Time to make: two weeks

Although this is not my first rodeo with men's hoodies, with this particular one I found myself going back to basics - I took notes from  my first hoodie for husband and used some of the techniques I had applied then, three years and ten hoodies ago :). I added pieces of fabric, where the hem rib meets the front zipper, I enclosed the end of the zipper in the hood and hid the seam of the hood inside the lining of the hood - small touches, which give more professional look to the garment, IMHO.

I had thought that the piece of fabric was big enough for a hoodie and a pair of joggers, but I was wrong. I do plan to buy more of the fabric and make husband the joggers, as he asked for them, but later in the autumn, as the season for warm lounge clothes is already over here.

A pair of green wood-peckers we saw in the park yesterday, where we took these pictures.

Pink Sweater with Half-Zipper

 I am finally ready with my third project of the Make Nine plans for the 2025 - the pink sweater.

Last year I made a pink hoodie for Gaby out of a big piece of sweatshirt fabric and I had quite a significant amount of it left - and I hate wasting fabric. My plan for it was to make another hoodie for myself, using the same iconic Burda pattern. 

Once I took out the pattern pieces, it became obvious, that if i didn't want colorblocking and insisted on having a solid color sweater out of this piece of fabric, I had to make quite a lot of changes and compromises. I could not have a hood and the cuffs and hem had to be cut out of ribbed fabric. I also had to shorten the sweater a bit and then also narrow it a bit - this was not a big problem for me, as I am petite and the pattern is quite wide. Finally, either the front or the back had to be cut in two separate pieces. I decided to make it a simple sweater with ribbed cuffs and neck, so I cut the front on fold and made the back with a seam. Luckily, I had some ribbed fabric, which was almost perfect match to the main fabric. 

Then, when I was almost ready with the sweater and was debating with myself whether to add the kangaroo pocket or not, I googled cropped sweaters and came upon plenty with half-zippers. At this point I had only cuts of fabric left, but the idea of adding a collar and half-zipper kept gnawing at me. I abandoned the project for a while and let it stew.

Meanwhile I bought three more or less suitable zippers, watched probably a dozen of videos on sweaters with half-zippers and in the end constructed my own collar and lining. I was able to cut four pieces of the collar and two triangular shaped pieces of lining for the zipper out of the fabric remnants. Thus the inside of the zipper and the collar came out very neat. I am really pleased with the result and plan to make more half-zipper sweaters in the future, as I quite like the style.

Pattern: Hoodie 102 Burdastyle 03/2022 plus elements of Burdastyle 113 09/2020

Fabric: sweatshirt knit

Size: 36, - 6 in width, -3 cm in length

Time to make: one month

The collar can be worn turned, opened or fully closed, but I think I like it best half open and up. I made the collar curved, wider at the base than at the top, using the collar from Burda 113 09/2020 as a model. However, most of the video tutorials I watched used simple rectangular collars, so next time I make this type of zipper, I might try it that way, to test the difference.

The kangaroo pocket is also from the Burda 113 09/2020 hoodie, which I've already made twice. However, because my sweater is cropped, I had serious doubts about adding it, as in its full size it went almost up to my bust. In the end I decided to cut off 5 cm from its height and add it anyway and I am pretty pleased that I did it, as it brings the ribbed cuffs and the body together and adds some interest and sports vibe, which I like.

Despite all the compromises I had to make, I am really pleased with how this sweater turned out and I expect to wear it a lot, especially with ashes of roses being one of my favourite colors ever since I read Thorn Birds at the age of 14 :)

We took these pictures today in the yard of the local monastery - yes, we have a small monastery in the area. Our residential quarter was once a village right at the outskirts of the capital, with its own church, school, market place, community center, a monastery and even its own graveyard. Most of the houses are long gone, replaced by apartment buildings, but the focal points of communal life are still preserved, snuggled between the tall buildings. In some respects, despite the wide boulevards and subway station, it still has the vibe of living in a village and we love that.

Blue Hoodie for Gaby's Boyfriend

Two years ago I sewed a hoodie for Vali - Gaby's boyfriend, and that is still his favourite hoodie. Two years is a long period of time, so it was time for a new hoodie. Gaby and I chose the fabric - double sweatshirt fabric and the color - light milky blue. The pattern is the same I used last time for him - Brad by Vikisews

 Last time I had made some minor modifications to the pattern - I extended the width by 1 cm, a total of 4 cm, lowered the neck by 1 cm and shortened the body and the sleeves. Although Vali liked the hoodie as it was, I thought it needed some lengthening, so this time I returned the pattern to its original length. As it turned out, it came out a bit too long, so the third time should probably be the charm lengthwise :) 

I don't remember whether I made any mods to the hood last time, however now I decided to use a completely different hood, which I know fits men's heads well - from a Burda hoodie I made for husband last year. I bought a thick cord for the hood and installed my biggest grommets - I think they look nice.

Pattern:  Hoodie Brad by Vikisews

Size: 178-184 cm; 40; modified

Fabric: sweatshirt knit fabric, rib knit, cotton knit

Time to make: five days

I also added the kangaroo pocket I had designed for this sweatshirt last time, as this hoodie comes without a pocket.

I hope the new hoodie would be as much loved and worn as the green one:)

This was actually the last finished project for 2024, but I still have to show you the blouse I made for Gaby before that, so there will be more 2024 FO pictures soon.