Oven Mitts

I know that some seamstresses frown upon sewing household items, while on the other end of the spectrum - some are afraid of fitting and measuring and prefer to limit their hobby to non-clothes items. 

I am omnivorous - I love the challenge of clothes making, but I don't shy away from sewing curtains, table-cloths, cushion covers, bed linen - all kinds of practical items, that are needed in a household.

Last year I made a pair of kitchen curtains for Gaby's apartment and this year I added two table-cloths and a set of cushion-covers for their kitchen chairs. I had really small leftover from both fabrics, so last month I decided on a whim, to use them to make two pairs of oven mitts - one for Gaby and one for myself.

Gaby's set consists of one oven mitt and one pot holder, one side pistachio green and the other printed. I downloaded the free pattern from hallosewing - it is easy to print and comes with clear instructions. The lining is ranforce cotton, remnants from bed linen I made for my son, and I had the batting in my stash from previous projects. The whole idea was that these small items were to be some stash busting, so no new material was bought for these.

My set consists of two identical oven mitts, with both sides of the mitts combining the two fabrics, not out of some fancy, but as I had only very limited scraps of the green fabric left. I tested my pair of mitts with some baking today and so far I am very pleased with my new kitchen acquisition.

Although I found the making of these mitts fun, I'm not sure I would make any more any time soon - it did take a lot of time and effort and oven mitts are easily obtainable for a couple of euros in the kitchenware isle at the local supermarkets :) But we'll see, the mitts bug might bite me again, I have so many more fabric scraps.

Makes for the Boys

A few knit fabric practical sportswear I made for the men in my family. These are patterns that I've used many times and I've tweaked enough to fit the recipients.

First - two joggers for husband and son. The fabric and the pattern are the same, cotton and viscose, very light french terry for the home office in the summer months. The pattern is Jack by Vikisews, which i bought for husband, when he was a size bigger. Being lazy and thrifty in the best way :), I just adjusted the width to fit his new size (-1 cm from all parts, a total of -4 cm). 

I've tried several other men's joggers before, Burga and Shkatulka, but Jack from Vikisews is the best, in my opinion. My husband prefers his joggers with an elastic at the ankles, so I added coordinated grey rib knit.

Pattern: Jack by Vikisews

Size: 44 (L) Height: 178-184 cm

Fabric: cotton viscose French terry

Time to make: 5 days

The second pair is for our son, his has straight legs without the rib knit and is one size smaller - so I removed -2 cm width from every pattern piece, a total of -8 cm. I also had to add some length to the legs, to compensate for the lack of rib hems.

Pattern: Jack by Vikisews

Size: 42 (M) Height: 178-184 cm

Fabric: cotton viscose French terry

Time to make: two weeks

The third make is for my father - a long sleeve blouse. I've made this pattern many times for the boys, this time I chose the biggest Burda size - 54. The fabric is very soft and stretchy cotton with lycra.

Pattern: Burda #132 from 12 / 2020

Size: 54 with with added length

Fabric: cotton knit with lycra

Time to make: 4 days

I made some of my usual mods - I added a small pocket for interest, I also added cuffs to the sleeves and finished the neck, using my favourite method with a contrast knit fabric tape. I hope it fits well.

Blue Rhapsody with Butterflies

Rhapsody is definitely my most beloved blouse pattern and I have used it more than a dozen of times (this is my 15th Rhapsody, to be precise!), making blouses for myself and Gaby, and even one for my mother.

Despite the fact, that I have a number of them, I have a favourite, which I wear in the summer more than any other. It is the one with 3/4 bishop sleeves with ruffles and I've been planning a repeat ever since.

I had a piece of fabric left from the georgette with butterflies - I have a sleeveless dress out of this fabric and a long sleeve shirt with a bow collar (which I have never worn :( ), and I though I could make a sleeveless Rhapsody out of the remnants. 

But then, with a bit of sacrifice on the length - I love the shorter length! - and some shenanigans with the sleeve ruffles - they were cut separately and added to the sleeves, hiding the seam in the elastic, I managed to get a 3/4 sleeved Rhapsody and I am ecstatic! Now I am waiting for the warm weather to add it to my staple spring and summer wardrobe.

Apart from shortening the blouse, I made almost no mods to the pattern in addition to my usual mods. All the seams are french seams, including the seams, attaching the sleeves to the body and I used the burrito method for the yoke. However, I did try something new - I stay-stitched and added fusible to the curved edges - sleeve openings and neckline. The fusible is a step I skipped previously and for good reason - stay-stitching is plenty enough for stabilizing these seams, the fusible made the seams too stiff and I wouldn't recommend it for delicate fabric as this thin georgette.

Pattern: Rhapsody by Love Notions 

Size: XS, modified

Fabric: Polyester Georgette, 1 m

Time to make: 3 days

I finished the blouse more than a month ago, we took the pictures three weeks ago, but I've been so busy with work and prepping the balconies for the spring, that I've had almost no time for blogging. Meanwhile I finished sewing three more items, now I  need to photograph and post about them. Stay tuned :)

Yellow T-Shirt for Gaby's Boyfriend

The overlocker was threaded with yellow threads, the yellow cotton fabric, which I bought for the lining of Vali's yellow hoodie and the yellow ribbing were out - there was no doubt in my mind what my next sewing project should be - a new T-shirt for Vali. 

I used the tried-and-true Burda #132 (12/2020) T-shirt pattern, which is my go-to for any men's T-shirts I make. There's really nothing more to say about this T-shirt, the only "novelty" I did was to use ribbing for the neckpiece, sleeve cuffs and pocket.

Pattern: Burda #132 (12 / 2020)

Size: 46

Fabric: cotton knit, cotton ribbing

Time to make: 3 days

The finishing from the inside - I covered the back seam, as they do in high-end T-shirts, and I also added my personalized label, because - why not :) I hope he likes the daring colors :)

New Hoodie for Gaby's Boyfriend

I am being a "good girl" this year and continuing with my Make Nine pledge through the second month of the year! 

My newest make is a hoodie for Gaby’s boyfriend (Fabrics #2 and #3). The pattern is the tried-and-true Brad hoodie by Vikisews. I’ve already made this for him twice—once in green and once in blue sweatshirt knit.

I made a few modifications to the pattern; some are my usual tweaks, while others are new. We’ll see how they influence the final fit when Vali tries it on. As for the usual mods, I added a total of 4 cm to the width of the body. Although Vali is quite athletic and slim, he prefers his hoodies on the looser end of the spectrum. I also swapped in a different hood pattern from Burda, as the original Vikisews hood is a bit too large.

Pattern:  Hoodie Brad by Vikisews

Size: 178-184 cm; 40; modified

Fabric: sweatshirt knit, rib knit, cotton jersey

Time to make: five days

The Brad hoodie comes without a pocket, so I added a kangaroo pocket that I designed specifically for this pattern the first time I made it for Vali about three years ago.

I also adjusted the length again. The first version was a bit too short, and the second was a bit too long; I’m hoping this "middle ground" is the charm!

To finish the inside, I covered the neckline seam with twill tape to give the garment a sleeker, more professional look.

Winter was back in town this weekend. The weather was miserable, so we decided to skip our weekly hike. However, the temperatures for the coming week look promising — I’m hoping for a warm, sunny weekend and a satisfying hike soon!

Bonus Blue Hoodie for Gaby

Inspired by the hoodie I made from plush and polar fleece remnants, I dove into my bag of heavyweight brushed fleece scraps. I selected several large pieces that complemented each other and seemed sufficient for a woman's hoodie. The light blue is from Vali's hoodie that I made last year and the navy blue is leftovers from my husband's hoodie and an earlier project for Gaby.

This patchwork involved again a lot of planning, drafting and rearranging of pattern pieces, until I finally managed to fit everything onto the scraps.

Unlike my previous "Page" hoodies, this one is slightly longer, featuring rib-knit cuffs and a hem. I even added a kangaroo pocket. While most of the pieces follow the original Burda pattern, the pocket and hood incorporate elements from a Grasser pattern and another Burda design. It goes to show that the more you sew and the more patterns you collect, the more the process evolves from simple construction into co-designing.

Because fabric for the hood was scarce, I decided to make it from three pieces. This is a fantastic fabric-saving hack, and three-part hoods often offer a better fit. For the lining, I used the blue polyester hood lining I had originally cut for the previous project but ultimately rejected.

Pattern: Burda #103 01/2017

Size: 36, modified

Fabric: sweatshirt fleece

Time to make: 4 days

The finished hood is warm and deep enough without overwhelming the head or pulling backward - an issue I've had with other sweaters.

The side panels are made out of a single piece, eliminating the side seam.

I am thrilled with how this "bonus" hoodie turned out. I had not listed these fabrics in my Make Nine pledge, but this project is a classic stash-buster. No new materials were purchased; every single notion, even the hood string, was something I already had, left over, or salvaged. The end result is an absolute win!

Plush Loungewear Set

I made myself a new set of loungewear and I am quite happy about it. It is another part of my 2026 Make Nine pledge, featuring Fabric 11 (asphalt-colored plush) and the remnants of Fabric 12 (brick-colored fleece). I sewed the heck out of these fabrics: two zippered jackets, one pair of joggers, and one hoodie, all from just 3.5m of fabric!

The pants use the same pattern - Burda #135 (11/2012) - that I made earlier this year for Gaby, but I opted for a larger size 36. I made some major modifications: I elongated the crotch by 3 cm from the top (including seam allowance) and the legs by 11 cm from the bottom. I also straightened the leg below the knee to get a nice straight-leg fit .I am thrilled with the result; the fit is much, much better than Burda #117 from 06/2021, which I’ve sewn a few times before. This is now my go-to pattern for straight joggers!

Pattern: # 135 Burda 11 / 2012

Size: 36, elongated

Fabric: plush fleece

Time to make: 4 days

My only regret with this set is making the jogger pockets entirely out of the main fabric. I had planned everything carefully, intending to cut one pocket piece from plush and the other from a thin black cotton knit. However, it was late in the evening after work when I started sewing, and I accidentally attached the plush piece to the front instead of the lining.

I only noticed the mistake after the pocket was fully assembled. I made a calculated choice: instead of undoing the seams—a nightmare since this plush frays like crazy and hates being unstitched—I decided to just cut two more fleece pieces. It’s not a dealbreaker, but the pockets are a bit thicker than I’d like. Next time, I’ll remember: the best combination for fleece or plush is one piece of main fabric and one piece of thin lining. Trust me, I know from experience!

After the joggers and jackets, I still had some large remnants left, so I decided to make a matching hoodie. This little project took so much effort - measuring, browsing patterns, and Googling colorblock inspiration. I’d wake up with one image in my head only to scrap it and replace it with another!  In the end the choice fell on Burda #103 (01/2017), which I've already made once for myself, out of sweatshirt fleece remnants.

Pattern: Burda #103 01/2017

Size: 36, modified

Fabric: plush fleece, polar fleece

Time to make: actual sewing - two days

I chose the pattern, as raglan sweaters suit color blocking exceptionally well. Besides I know the pattern and my "Page" hoodie, with its relaxed fit, is still one of my most favourite winter wears. 

The hoodie is hemmed with a mirror piece of fabric on the inside; the polar fleece front is hemmed with polar, and the plush back with plush. Yes, I am that pedantic!

For the hood lining, I originally cut a blue polyester piece left over from my zippered jacket. However, I realized I preferred the feel of the brick-colored fleece against my skin. I gathered all my scraps and played a little "fabric Tetris" - one side of the hood lining is made of two pieces, and the other of three! The seams are hidden inside, the look is consistent, and I am so proud of myself for pulling it off. (And don't worry, the blue lining was used in my next project, so nothing went to waste!)

My overall impression - I am so glad I made this hoodie happen, never underestimate the potential of fabric scraps - you just might find an entire hoodie in there:)