Showing posts with label lounge. Show all posts
Showing posts with label lounge. Show all posts

Tuesday, February 10, 2026

Plush Loungewear Set

I made myself a new set of loungewear and I am quite happy about it. It is another part of my 2026 Make Nine pledge, featuring Fabric 11 (asphalt-colored plush) and the remnants of Fabric 12 (brick-colored fleece). I sewed the heck out of these fabrics: two zippered jackets, one pair of joggers, and one hoodie, all from just 3.5m of fabric!

The pants use the same pattern - Burda #135 (11/2012) - that I made earlier this year for Gaby, but I opted for a larger size 36. I made some major modifications: I elongated the crotch by 3 cm from the top (including seam allowance) and the legs by 11 cm from the bottom. I also straightened the leg below the knee to get a nice straight-leg fit .I am thrilled with the result; the fit is much, much better than Burda #117 from 06/2021, which I’ve sewn a few times before. This is now my go-to pattern for straight joggers!

Size: 36, elongated
Fabric: plush fleece
Time to make: 4 days

My only regret with this set is making the jogger pockets entirely out of the main fabric. I had planned everything carefully, intending to cut one pocket piece from plush and the other from a thin black cotton knit. However, it was late in the evening after work when I started sewing, and I accidentally attached the plush piece to the front instead of the lining.

I only noticed the mistake after the pocket was fully assembled. I made a calculated choice: instead of undoing the seams—a nightmare since this plush frays like crazy and hates being unstitched—I decided to just cut two more fleece pieces. It’s not a dealbreaker, but the pockets are a bit thicker than I’d like. Next time, I’ll remember: the best combination for fleece or plush is one piece of main fabric and one piece of thin lining. Trust me, I know from experience!

After the joggers and jackets, I still had some large remnants left, so I decided to make a matching hoodie. This little project took so much effort - measuring, browsing patterns, and Googling colorblock inspiration. I’d wake up with one image in my head only to scrap it and replace it with another!  In the end the choice fell on Burda #103 (01/2017), which I've already made once for myself, out of sweatshirt fleece remnants.

Size: 36, modified
Fabric: plush fleece, polar fleece
Time to make: actual sewing - two days

I chose the pattern, as raglan sweaters suit color blocking exceptionally well. Besides I know the pattern and my "Page" hoodie, with its relaxed fit, is still one of my most favourite winter wears. 

The hoodie is hemmed with a mirror piece of fabric on the inside; the polar fleece front is hemmed with polar, and the plush back with plush. Yes, I am that pedantic!

For the hood lining, I originally cut a blue polyester piece left over from my zippered jacket. However, I realized I preferred the feel of the brick-colored fleece against my skin. I gathered all my scraps and played a little "fabric Tetris" - one side of the hood lining is made of two pieces, and the other of three! The seams are hidden inside, the look is consistent, and I am so proud of myself for pulling it off. (And don't worry, the blue lining was used in my next project, so nothing went to waste!)

My overall impression - I am so glad I made this hoodie happen, never underestimate the potential of fabric scraps - you just might find an entire hoodie in there:)


Sunday, January 4, 2026

Joggers for Gaby

My first make for the new year is ready and it is a pair of joggers for Gaby. This is my first Make Nine for the year, and I hope the list of fabrics from the stash, successfully made into garments, will grow steadily.

The pattern for the joggers is an old Burda acquisition, that I've already made twice, once for myself and once for Gaby. As my daughter is a bit slimmer and taller than me, the joggers are a little tighter around the hip area and longer, than if I was making them for myself. However, Gaby is in Vienna and me posing is the second best way to demonstrate my new make.

Size: 34
Fabric: french terry
Time to make: 2 days
 

My mods to the pattern - as per usual - I added 3 cm to the upper part of the pattern pieces (including 0.8 cm seam allowance), as the joggers are cut too low. I also added 6 cm (including 0.8 cm seam allowance) to the length of the legs - the original envisions long cuffs, I prefer normal 6.5 cm cuffs.

The joggers have deep and comfortable inseam pockets.

The cuffs are out of rib knit and I made the waistband out of the main fabric and added a 3.2 cm wide elastic inside. All in all I am very happy with how these turned out and now I want a pair of similar joggers for myself, I will only have to find another piece of quality french terry.


Friday, October 15, 2021

Lounge Pants

I made a new pair of lounge pants for myself. On Wednesday the rain stopped like for a minute and I ran downtown and indulged in a fabric shopping spree. My alibi was that I was buying fabric for a pair of lounge pants for my husband, who politely asked for a  new extra warm pair. The temperatures in Sofia dropped significantly this week and even Alex put on long lounge pants.

Long story short - I bought some 10 m of various fabrics and some sewing notions and happily returned home. However, husband did not approve of the french terry I had bought for his joggers - he found it too thin. Ah, never mind, I liked it, so I immediately browsed through my Burda jogger patterns and found one I still hadn't tried, but wanted too.

This is #135 from Burda 11 / 2012. The pants are low cut, with long ribbed cuffs and side seam pockets. As I read that they come a bit too wide, as most Burda patterns, I cut size 34, the smallest size, though I'm closer to 36 according to my hip measurements.


I made a few small adjustments to the pattern - I raised the crotch part of the pants by 1.5 cm and made the ankle cuffs shorter - mine are 8.5 cm instead of 18 cm. I like the long cuffs on the original, but my rib knit turned out to be too stiff and wouldn't fold like in the magazine photo.

For the pockets I followed again this video tutorial, mostly because I couldn't quite get my head around the Burda instructions.

I made the waistband as per instructions out of rib knit, without an elastic, but I made an opening and I might add an elastic, in case the rib knit proves insufficient to hold them in place.

Size: 34
Fabric: lightweight french terry, 100% cotton; rib knit for cuffs and waistband
Time to make: 1 day